Kit Preparation - Metra Electronics 99-8222 Installation Instructions Manual

From the factory radio/display assembly:
1. Remove (2) Phillips screws securing the
display panel, then remove. (Figure A)
2. Unclip and remove the hazard switch
assembly. (Figure B)
3. Remove (4) panel clips. (Figure C)
Continued on the next page

KIT PREPARATION

ONE
SCREW
ON EACH
SIDE
SIDE VIEW
CLOCK/DISPLAY-
RADIO ASSEMBLY
(Figure A) (Figure B)
REMOVE
4 PANEL CLIPS
(Figure C
REV. 6/25/2019 INST99-8222
3