Advertisement
Kit Preparation
1. Attach the pocket assembly to the
99-7352B radio panel using the (4)
#8 x 1/2" Phillips screws provided.
(Figure A)
2. Attach the climate control to the
99-7352B radio panel using (4)
#8 x 1/2" Phillips screws provided.
(Figure B)
3. Attach the factory gauges to the
99-7352B radio panel using (4)
#8 x 1/2" Phillips screws provided.
(Figure B)
(Figure A)
4. Attach the provided (2) panel
clips to the upper legs and the (2)
factory clips to the lower legs of
the 99-7352B radio panel.
Continue to kit assembly
(Figure B)
99-7352B
1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
2. Attach the radio brackets to the
aftermarket radio using the screws
supplied with the radio, then
secure the assembly to the pocket
using the (4) #8 x 3/8" Phillips
screws. (Figure A)
3. Mount the assembly into the
sub-dash.
4. Reassemble dash in reverse
order of disassembly using the
99-7352B trim panel instead of the
factory trim panel.
Kit Assembly
(Figure A)
Advertisement
