INSTALLATION INSTRUCTIONS FOR PART 99-8206 Toyota Highlander 2001-2007 4-Runner (Excluding Limited) 2003-2008 99-8206 KIT FEATURES • DIN Head Unit Provision with Pocket • ISO DIN Head Unit Provision with Pocket KIT COMPONENTS A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Highlander Brackets • E) 4-Runner Brackets Phillips Screwdriver •...
99-8206 TOYOTA 4 RUNNER 2003-2008 (EXCLUDING LIMITED) Disconnect the negative battery ter- minal to prevent an accidental short circuit. Unsnap and remove trim from around shifter. Unsnap and remove trim covers from around center console pocket edge at front and rear of console.
99-8206 TOYOTA HIGHLANDER 2001-2007 Disconnect the negative battery terminal to prevent an accidental short circuit. Pull and remove dash panel from radio and climate controls. Tip: There are 8 clips. (Figure A) Remove (6) 10mm bolts from radio and climate controls assembly.
99-8206 KIT DISASSEMBL Y 4 RUNNER BRACKET ASSEMBL Y TOYOTA HIGHLANDER BRACKET ASSEMBL Y Snap the appropriately marked Mounting Brackets for your application onto the sides of the Radio Housing. The brackets are marked 4-Runner or Highlander and left or right. (Figure A - 4 RUNNER)
99-8206 DIN HEAD UNIT PROVISION WITH POCKET Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure A) Snap the aftermarket radio into the cage and secure. (Figure B) KIT ASSEMBL Y...
99-8206 ISO DIN HEAD UNIT PROVISION Mount the ISO Brackets to the head unit with the screws supplied with the radio. (Figure A) Snap the radio into the radio housing until the side clips engage. (Figure B) Snap the ISO Trim Plate onto the Radio/Housing assembly.