Advertisement
To the 99-8222 radio housing:
4. Attach the radio housing brackets.
(Figure D)
Note: Make sure the leg on the bracket
points outward.
5. Slide the factory display panel into the
radio housing, then secure using the
factory screws. (Figure E)
6. Clip in the hazard switch assembly.
(Figure F)
7. Attach the (4) factory panel clips
removed in step 3. (Figure G)
Continue to Kit Assembly
4
KIT PREPARATION
(Figure D)
(Figure F)
(CONT.)
(Figure E)
ATTACH
4 PANEL CLIPS
(Figure G)
|
1.800.221.0932
MetraOnline.com
Advertisement
