Advertisement
1. Attach the factory metal clips removed
in Dash Disassembly to the radio trim
panel. (Figure A)
2. For base model Jetta:
Remove (5) Torx T-20 screws, then
remove the radio support bracket.
(Figure B)
3. Secure the support bracket to the
vehicle using (2) #8 x 1/2" Phillips truss-
head screws provided. (Figure C)
4
KIT PREPARATION
(Figure A)
(Figure B)
(Figure C)
4. Secure the panel clip mounts to the
radio trim panel using (4) #4 x 3/8"
Phillips pan-head screws provided.
(Figure D)
5. Attach the (2) panel clips provided to
the panel clip mounts. (Figure E)
Continue to Kit Assembly
(Figure D)
(Figure E)
|
1.800.221.0932
MetraOnline.com
Advertisement
