Outgoing Default Line; Hunting Groups; Figure 25: Account Status - Line Status - Grandstream Networks DP750 Administration Manual

For example: If the account 2, 4, 5, and 6 are assigned to the HS2, the column of HS2 will have cells 2, 4,
5 and 6 in green background, and account 1, 3, 7, 8, 9 and 10 are in gray background. If a line is being
used it will be blinking in a green / white background.

Outgoing Default Line

When a Handset is configured with more than one line, users can change
the default outgoing line on DP720 Handset using keypad Menu 
Preferences  Outgoing Default Line, see next screenshot

Hunting Groups

DP750 supports 3 types of hunting groups as described below:
In the examples below, we consider that all handsets are in same hunting group and only the type of hunting
group differs.
 Circular: The base station will note which handset answered the last call, and forward the call to the
next available handset in round-robin fashion.
In the example below; the 1
incoming call will be sent to HS2 since previous call was answered by HS1 and HS2 is the next available
handset in the list; 3 rd
busy making an outgoing call (if HS3 was available, the call will be sent to HS3).
Figure 25: Account Status – Line Status
st incoming call was sent to HS1 since all handsets were available; 2
will be sent to HS4 since HS2 was the last one answering the call and HS3 is
DP750/DP720 Administration Guide
Version 1.0.11.4
nd
P a g e | 83