Grandstream Networks DP750 Administration Manual page 57

Admin PIN Code Configures admin PIN code for authentication. Default is 0000.
Enable Repeater Enables the base station repeater mode to associate with available repeaters. Once
Mode enabled the base station starts searching for nearby repeaters and open
subscription to associate with the available repeaters. This option requires
rebooting the base station to take effect. Default is No.
Enable Repeater Enables base station network management of discovered and paired repeaters.
Once enabled, users need first to reboot the base station to take effect, then login
Management
on the web UI and browser to Status page, a new tab "DECT Repeater Status" will
be available to display discovered and paired devices and also allowing users to
associate / dissociate repeaters and also access their web GUI. Default is No.
DECT PTT Silence Sets timeout for PTT call (in minutes) if no handset unmutes. If set to 0, this timer
Timer will be disabled.
Clear Call Logs Deletes call history logs of all handsets from base station.
Handset Settings Handset
Handset Name
Handset
Phonebook
Off-hook Auto-
dial
SIP Account Settings
Account
Displays list of accounts' indexes, from account 1 to account 10.
SIP User ID
Enters SIP user ID provided by VoIP service provider (ITSP). Usually in the form of
digit similar to phone number or actually a phone number.
Authenticate ID Enters account authenticate ID provided by VoIP service provider (ITSP). Can be
identical to or different from "SIP user ID".
Password
Specifies account password provided by VoIP provider (ITSP) to register to SIP
servers.
Name
Chooses a name to be associated to user. Supported length is 256.
Profile
Selects the profile ID (1/2/3/4).
Displays list of handsets' indexes, from HS 1 to HS 5.
Allows to customize handset name. Default is "HS1" to "HS5"
Assigns private phonebook to handset. Each handset has a
private phonebook or can be disabled. A private phonebook can
be shared between specific handsets.
Example: PB1 assigned to HS1 and HS2
Configures a number to auto dial when off-hook.
DP750/DP720 Administration Guide
Version 1.0.11.4
P a g e | 57