Setting Up The Charge Station; Dp750 Led Patterns; Table 6: Dp750 Led Patterns; Figure 6: Setting Up The Charge Station - Grandstream Networks DP750 Administration Manual

Setting up the Charge Station

Please refer to the following steps for setting up the charge station and charging the handset:
1. Connect the DC plug on the power adapter to the micro-USB connector on the charge station.
2. Connect the other end of the power adapter into an electrical power outlet.
3. After setting up the handset and the charge station, place the handset in the charge station.

DP750 LED Patterns

The DP750 has 5 LED lights on it. Please refer to the following table for the meaning of each light.
Status
LED Light
Indicates Power ON/OFF.
Indicates access to the network. Remains ON while there is access to the network.
Indicates if a SIP account is registered.
Indicates status of the lines.
Blinking: A line is in use. Solid ON: All lines are free.
The Radio icon for pairing the DP720 and DP750; when holding the Radio button,
blinking indicates a pairing attempt.
3
1

Figure 6: Setting up the charge station

Table 6: DP750 LED Patterns

DP750/DP720 Administration Guide
Version 1.0.11.4
2
P a g e | 27