Changing Http / Https Web Access Port; Figure 13: Admin Level Password - Grandstream Networks DP750 Administration Manual

a. Type in your new Admin Password in New Password field.
b. Type in again same entered password in Confirm Password field.
5. Press Save and Apply to save your new setting.
Note: DO NOT USE same password for both user and admin accounts.

Changing HTTP / HTTPS Web Access Port

1. Access the Web GUI of your DP750 using the admin's username and password. (Default username
and password is: admin/admin).
2. Press Login to access your settings.
3. Go to Maintenance  Security Settings  Web/SSH.
4. In Web/SSH Settings page, locate HTTP / HTTPS Web Port field and change it to your
desired/new HTTP / HTTPS port.
Note: By default, the HTTP port is 80 and HTTPS is 443.
5. Select the Web Access Mode depending on desired protocol (HTTP or HTTPS).
6. Press Save and Apply to save your new setting.
Note: A reboot is required for this change to take effect.

Figure 13: Admin Level Password

DP750/DP720 Administration Guide
Version 1.0.11.4
P a g e | 41