Management Method; Web Management - Planet HPOE-1200G User Manual

3.3 Management Method

User can manage the PoE injector Hub by Web Management via a network connection.

3.3.1 Web Management

The PoE Injector Hub can be configured through an Ethernet connection. The factory default IP address is 192.168.0.100
with subnet mask 255.255.255.0, so please make sure the manager PC must be set on the same IP subnet address. For
example, if POE Injector Hub IP address is set to factory default, then your manager PC should be set at 192.168.0.x
(where x is a number between 1 and 254, except 100) with a subnet mask of 255.255.255.0.
1. Use Internet Explorer 7.0 or above Web browser. Enter IP address http://192.168.0.100 to access the Web interface.
2. When the following login screen appears, please enter the default username "admin" and password "admin" to login
the main screen of PoE Injector Hub. The login screen in
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
User's Manual of POE-1200G / POE-2400G / HPOE-1200G / HPOE-2400G
Figure 3-1-1: Web Management over Ethernet
Figure 3-1-2
Figure 3-1-2: PoE Injector Hub Web Login Screen
22
appears.