System Information - Planet HPOE-1200G User Manual

 Firmware Upgrade
 Configuration Setting
 Factory Default
 System Log
 System Reboot

4.3.1 System Information

This section displays system information of PoE Injector Hub as the screen in
the system information of the PoE Injector Hub.
Object
 System Name
 MAC Address
 Software Version
 Build Time
 Hardware Version
 Attain IP Protocol
 IP Address
 Subnet Mask
 Gateway
 Description
 System Date
 System UpTime
Table 4-3-1: Descriptions of the System Information Objects Screen
User's Manual of POE-1200G / POE-2400G / HPOE-1200G / HPOE-2400G
section 4.3.4.
Allow to upgrade the latest firmware in the future.
Allow to back up or restore system configuration.
Allow to reset system to factory default setting.
Allow to enable system log and to record system log.
4.3.8.
Allow to reboot system.
Figure 4-3-1: System Information Web Page Screen
Description
Displays the PoE Injector Hub model name.
Displays the MAC address of PoE Injector Hub.
Displays the current firmware version of PoE Injector Hub.
Displays the firmware build time.
Displays the hardware version of PoE Injector Hub.
Displays the currently attained IP protocol of PoE Injector Hub.
Displays the current IP address of PoE Injector Hub.
Displays the current subnet mask address of PoE Injector Hub.
Displays the current gateway address of PoE Injector Hub.
Displays the system description of PoE Injector Hub.
Displays the current system date of PoE Injector Hub. The system date will be
correct if NTP function is enabled and the Hub is connected to Internet.
Displays when the system will start up.
27
Explained in section
Explained in section
Explained in section
Explained in section 4.3.9.
Figure 4-3-1 appears.
4.3.5.
4.3.6.
4.3.7.
Explained in section
Table 4-3-1 describes