Adjusting Subclass 550-121 For Machines With An Edge Pinker - DURKOPP ADLER 171 Service Instructions Manual

13.3 Adjusting subclass 550-121 for machines with an edge
You will only have to adjust this subclass if you replaced the control.
To set the subclass for machines with an edge pinker:
1. Plug the dongle with the machine class into the control.
2. Press the
 You are on the Technician level.
3. Select parameter t 51 04.
4. Press the
5. Use the buttons A+/A- to select class 171.
6. Press the
7. Use the buttons A+/A- to select subclass 550-121.
8. Press the
 The data is uploaded to the machine.
70
pinker
and
button.
button.
button.
buttons at the same time.
Service Instructions 171/173 - 00.0 - 01/2020
Programming