Fortinet FortiGate-7000E Series System Manual page 52

FortiGate-7040E management module
Action
Log into the CLI.
Log out of the CLI.
Available on the
passive module.
Display all
commands.
Available on the
passive module.
Display information
about all SMC
firmware in the
chassis.
Display SMC device
ID, Build
Date/Number, SMC
firmware
information, address
info, entity map for
the device in the slot.
Available on the
passive module.
Display status, power
budget and hot swap
state for all modules.
Available on the
passive module.
List the IPMI
channels.
Change the SDI
verbosity level.
<level> can be:
0: Alerts + Errors
1: Alerts + Errors +
Verbose + Low-Level
Errors
2: Alerts + Errors +
Verbose + Low-Level
Errors + PI traffic
3: Alerts + Errors +
Verbose + Low-Level
Errors + PI traffic +
IPMB traffic + LAN
Interface traffic
FortiGate-7040E System Guide
SMC CLI Commands
Ctrl-R
exit (followed by Ctrl-R)
help
info
info <slot>
status
channel list
verbose <level>
IPMI Commands
N/A
N/A
help
mc info
N/A
N/A
channel info [<channel-number>]
N/A
Fortinet Technologies Inc.
52