Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fortinet FortiSandBox 500G
Summary of Contents for Fortinet FortiSandBox 500G
- Page 1 QuickStart Guide QuickStart Guide FortiSandBox 500G & 1500G FSA-500G, FSA-1500G...
-
Page 2: Before You Begin
Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. -
Page 3: Package Contents
Technical Support To access our Resource Center, Professional Services and Technical Support FortiSandbox 1500G Services, visit https://www.fortinet.com/support FSA-1500G Thank you for choosing Fortinet FortiSandbox Device QuickStart Guide 2x AC Power Cables 1x Console Cable 1x Ethernet Cable (RJ45 to USB) -
Page 4: Setup Options
Data bits: Stop bits: Parity: None USB Console Cable Flow Control: None Port 1 Console Port Management Computer Management Computer Ethernet Cable Note: For static IP configuration, use 192.168.0.1 with subnet mask Note: For a detailed CLI guide, visit docs.fortinet.com 255.255.255.0... -
Page 5: Desktop Installation
Desktop Installation Rack Mount (FSA-500G) 1.5in 1.5in 1.5in 1.5in Note: Place the device on a flat, clean and stable surface Brackets may vary in apperance Note: The recommended clearance is 1.5 inches above and below the device Caution: To avoid personal injury or damage to the device, it is recommended that two or more people mount the device on a rack... - Page 6 Rack Mount 8. Ensure the ball retainer is fully opened 9. Insert the inner rail into the cabinet (FSA-1500G) 10. Press the trigger down and push the chassis into the cabinet Assemble the slide rails to mount in a standard 19 inch rack. 1.
- Page 7 Front FSA-500G Power LED Green: Device is on Off: Device is off System Status LED Green: Normal operation Red: System failure Off: Device is off Console Port (RJ45) CLI management USB Ports (USB A) not in use Ports 1 to 4 (RJ45) Activity(Left LED) Link (Right LED) Flashing...
- Page 8 Rear FSA-500G VGA Port (DB15) not in use ESD Plug (Banana Socket) Grounding Screw (Earth Ground) Power Switch (Toggle) Power Supply Input 100-240 VAC, 50/60 Hz, 6-3A Max...
- Page 9 Front FSA-1500G Ports 5 & 6 (SFP+) Power LED Activity (Left LED) Link (Right LED) Green: Device is on Off: Device us off Flashing Green: Data activity Green: 10 Gbps Off: No link established Amber: 1 Gbps System Status LED Off: No link established Red: System failure Off: Normal operation or device is off...
- Page 10 Rear FSA-1500G Redundant Power Supplies (x2) 100-127VAC, 7.5A, 50-60Hz or 200-240VAC, 3.9A, 50-60Hz, hot-swappable Green: Power supply on Flashing Green: Power supply in standby Flashing Amber: Power supply on; error detected Amber: Power supply failure Off: Power supply off Power Switch (Toggle) PSU Failure Tone (Button) press to turn off ESD Plug (Banana Socket)
- Page 11 請依製造商說明書處理用過之電池 限用物質含有情況表 (RoHS Table) 請到以下 網址下載： CAUTION: https://www.fortinet.com/bsmi There is a danger of explosion if a battery is incorrect replaced. Replace only with the same or equivalent type. Dispose batteries of according to the manufacturer’s instructions. Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in an explosion.
- Page 13 Fortinet.com...