Connecting To Individual Fim And Fpm Clis Of The Backup Fortigate-7000 In An Ha Configuration - Fortinet FortiGate-7000E Series System Manual

Managing individual FortiGate-7000 FIMs and FPMs
<slot> is the slot number of the slot that you want to log in to.
After you log in to a different module in this way, you can't use the
command to log in to another module. Instead you must use the
component that you originally logged in to. Then you can use the
command to log into another module.
Connecting to individual FIM and FPM CLIs of the backup FortiGate-
7000 in an HA configuration
From the primary FIM of the primary FortiGate-7000 in an HA configuration, you can use the following command to log
in to the primary FIM of the backup FortiGate-7000:
execute ha manage <id>
Where <id> is the ID of the other FortiGate-7000 in the cluster. From the primary FortiGate-7000, use an ID of 0 to log
into the backup FortiGate-7000. From the backup FortiGate-7000, use an ID of 1 to log into the primary FortiGate-
7000. You can enter the ? to see the list of IDs that you can connect to.
After you have logged in, you can manage the backup FortiGate-7000 from the primary FIM or you can use the
execute-load-balance slot manage command to connect to the CLIs of the other FIM and the FPMs in the
backup FortiGate-7000.
FortiGate-7040E System Guide
execute load-balance slot manage
exit command to revert back to the CLI of the
execute load-balance slot manage
33
Fortinet Technologies Inc.