Deactivation - BMW C 400 X Rider's Manual

with Keyless Ride
6
110
A triggered alarm can be can-
celed at any time by pressing
the button 1 on the radio-oper-
z
ated key without deactivating the
DWA.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched
on. The DWA LED then signals
the reason for the alarm for one
minute.
OE Light signals on DWA LED:
1 flash: motion sensor 1
2 flashes: motion sensor 2
3 flashes: ignition turned on
with unauthorized ignition key
4 flashes: alarm system dis-
connected from vehicle battery
5 flashes: motion sensor 3
Reason for triggering of
the alarm
After the alarm function has been
deactivated, the DWA LED indi-
cates the reason for any alarm
activation which may have oc-
curred for one minute:
1x flash: movement sensor:
motorcycle was tilted forward/
back.
2x flashes: movement sensor:
motorcycle was tilted to the
side.
3x flashes: ignition was
switched on using an
unauthorized key.
https://www.motorcycle-manual.com/
4x flashes: anti-theft alarm sys-
tem was disconnected from
the vehicle battery.

Deactivation

with anti-theft alarm system
OE
(DWA)
Deactivating the alarm
function
Switch on the ignition with an
authorized ignition key.
OE
with Keyless Ride
Press button 1 on the radio-
operated key once.