Alarm Function - BMW C 400 X Rider's Manual

Press and hold the top of
the MENU rocker button 1 to
exit SETUP.
SETUP ENTER is displayed.
OE
with Connectivity
Switch on the ignition.
Call up menu Settings, Ve-
hicle settings, Alarm
system.
The following settings are avail-
able:
Adapt Warning signal
Switch Tilt sensor on and
off
Switch Arming tone on and
off
Switch Arm automatically
on and off
Programming options (
https://www.motorcycle-manual.com/

Alarm function

with anti-theft alarm system
OE
(DWA)
Alarm activation
The DWA alarm can be set off
by:
Motion sensor
Switching on ignition with an
unauthorized motorcycle key
Disconnection of the DWA
from the vehicle battery (DWA
battery takes over the power
supply)
Alarm signal
The DWA alarm can be set off
by:
motion sensor
111)
Switching on ignition with an
unauthorized motorcycle key
disconnecting the DWA from
the motorcycle battery (DWA
battery takes over the power
supply – alarm sound only, haz-
ard warning lights do not flash)
If the DWA battery is discharged
all functions remain operational;
the only difference is that the
alarm cannot be set off if the
system is disconnected from the
motorcycle battery.
The duration of the alarm is ap-
prox. 26 seconds. During the
alarm, an alarm tone sounds and
the turn indicators flash. The
type of alarm sound can be set
by an authorized BMW Motorrad
retailer.
6
109
z