Bluetooth Pairing - BMW C 400 X Rider's Manual

no guarantee for smooth opera-
tion in every situation.
Possible sources of
interference:
Interference fields due to trans-
mission towers and similar
Devices with incorrectly imple-
mented Bluetooth standard
By nearby Bluetooth-capable
devices

Bluetooth pairing

Before two Bluetooth devices
can be linked to one another,
they must recognize each other.
This process of mutual recogni-
tion is known as "pairing". Be-
cause two devices that have
been paired remember each
other, the Bluetooth pairing pro-
cess only needs to be conducted
once, on initial contact.
https://www.motorcycle-manual.com/
NOTICE
On some mobile devices, e.g.
with operating system iOS, the
BMW Motorrad Connected App
must be called up before using.
During the Bluetooth pairing pro-
cess, the TFT display searches
for other Bluetooth-capable de-
vices within its reception range.
The conditions that have to be
satisfied before the audio system
can recognize another device are
as follows:
The Bluetooth function of the
device must be activated
The device must be "visible" to
others
The device must support the
A2DP profile
Other Bluetooth-capable de-
vices must be OFF (e.g. mo-
bile phones and navigation sys-
tems).
Please consult the operating in-
structions for your communica-
tion system.
Pairing Bluetooth
Call up menu Settings, Con-
nections.
You can set up, manage and
delete Bluetooth connections
in the CONNECTIONS menu.
The following Bluetooth con-
nections are displayed:
Mobile device
Rider's helmet
Passenger helm.
The connection status for mobile
end devices is displayed.
Connecting a mobile end
device
Pairing Bluetooth (
Activate the Bluetooth function
of the mobile end device (refer
to the operating instructions of
the mobile end device).
5
95
z
95).