Set Commands - Campbell CELL205 Product Manual

show ip info #net
Returns the modems TCP/IP information for each network. When using the command, replace
#net with 1 for the PPP connection and 2 for the Ethernet over USB (RNDIS) connection.
show cellular Info
Returns the modem cellular information. Information returned is extensive and includes
information from other terminal commands.
show time
Returns the modem current time. Time returned by the modem is set by the cellular network.
show settings
Returns all the settings of the cellular modem.
show cellular errors
Returns an error information summary that can be used for troubleshooting.
show cellular log
Returns a log of events for the device. Useful for troubleshooting.
show update check
Returns information concerning the last update check.
show diagnostic report
Returns a diagnostic report that is useful for troubleshooting. Combines the output of many
other terminal troubleshooting commands.
show sms log
Returns a log of SMS messaging logs.
C.3 Set commands
Set commands are used to set specific settings in the device. Most settings will not take effect
until the device is rebooted.
set apn ###
Sets the APN (Access Point Name) in the device. Corresponds to the APN setting in the modem
web configuration interface. ### is a string the corresponds to the APN issued by the cellular
provider when the modem account was created.
CELL200-Series 4G LTE Cellular Module 77