Overview - Campbell CELL205 Product Manual

5. To edit settings at a later date, click devices and services
select Manage PakBus Routers.
NOTE:
The DNS address and Port number, assigned when your account was setup, cannot be
edited.

3. Overview

The CELL200-series modules may be configured in one of five ways, depending on the data
logger, communications type, and needs of the user.
Integrated: The module mimics the behaviour of our integrated cell modems. No
l
settings are configured directly in the module. All settings are configured in the
attached data logger.
Non-integrated: The module mimics the behaviour of our older cellular modems.
l
Settings must be configured in both the module and the data logger.
Serial Server: In this mode, the module receives IP communications over the cellular
l
network and converts those to serial communications to pass on to the data logger. From
the perspective of the data logger, this is no different than a serial cable connecting it to a
computer.
NOTE:
A public static IP account must be used when the module is set up in serial server
mode. Private dynamic IP accounts do not support the serial server mode.
on the command bar and
CELL200-Series 4G LTE Cellular Module 7