Campbell CELL205 Product Manual page 86

show baud
Displays the current baud rate of the cellular module RS-232 port. Corresponds with the RS232
Baud Rate setting in the web interface of the cellular module.
show mode
Displays the current operating mode of the cellular module. Results are PPP or Serial Server.
Corresponds with the Mode setting in the web interface of the cellular module.
show diversity
Displays the current setting of cellular module antenna configuration. Results are Disabled or
Enabled. Corresponds with the Diversity Antenna field in the web interface of the cellular
module.
show ipprotocol
Displays the current value of the cellular module IP protocol configuration. Results are IPv4, IPv6,
or IPv4/IPv6. Corresponds with the IP Protocol field in the web interface of the cellular module.
show sdc
Displays the current setting for the modem SDC address. Values are 7, 8, 10, or 11. This value
corresponds with the CS I/O Port SDC Address setting in the web interface of the cellular module.
show listen port
Displays the current setting for the cellular module TCP/IP listening port (used in Serial Server
mode). Values can range from 1 to 65535. Corresponds with the Serial Server Listen Port Number
setting in the web interface of the cellular module.
show billing
Displays the current value for the billing cycle day. Values can range from 1 to 31. Corresponds to
the Billing Cycle Day field in the web interface of the cellular module.
show roaming
Displays the current setting for the modem roaming capabilities. Return values are Auto and
Disabled. Corresponds to the Roaming setting in the web interface of the cellular module
show sdc term
Returns the current value for the SDC terminal interface in the modem. Returned values are 7, 8,
10, and 11. Corresponds to the Terminal Port CS I/O SDC Address setting in the web interface of
the cellular module
show model
Returns the model information of the modem. Returned values are CELL205, CELL210, CELL215, or
CELL220.
CELL200-Series 4G LTE Cellular Module 73