CRBasic Example 2: Settings configuration and status retrieval
'"Powered up. SIM auth failure.",
'"Querying modem.",
'"Waiting for network registration.",
'"Configuring modem.",
'"Dialing.",
'"Dialing (retry).",
'"Dialed.",
'"PPP negotiation.",
'"Network ready.",
'"PPP closing.",
'"PPP paused.",
'"PPP dropped.",
'"Terminal AT command mode.",
'"Firmware update mode.",
'"Shutting down."
cell_rsrp = Settings.CellRSRP
'Reference signal received power for LTE in dbm.
'Very similar to RSSI
cell_ecio = Settings.CellECIO
cell_rsrq = Settings.CellRSRQ
cell_ip_address =
'Get the TCP/IP address of the PPP/cellular modem interface.
CallTable
CELL_DIAGNOSTICS
NextScan
EndSequence
EndProg
'Reference signal received quality for 3G.
'Reference signal received quality for 4G.
IPInfo
(1, 0)
CELL200-Series 4G LTE Cellular Module
63