If the call is successful, the connectors at the bottom of the screen will come together and clock
information from the data logger will be displayed in the Station Date/Time field. If the
connection fails, a Communications Failure message will be displayed.
7. Operation and maintenance
7.1 Ports
The CS I/O port is the main port used with Campbell Scientific data loggers. Its function is
described throughout this manual.
The RS-232 port can also be used with Campbell Scientific data loggers through a null modem
cable (or CPI/RS-232 RJ45 to DB9 cable for the CR1000X and CR6 series).
The USB port is used to check the module status, configure the module, send a new operating
system, or watch low-level communications. This is done by opening a web browser and using
the following URL: www.cell.linktodevice.eu/.
TIP:
If your computer does not have access to a DNS server, browse to 192.168.86.1.
CELL200-Series 4G LTE Cellular Module
56