Verifying The Server Time, Date, And Timezone Settings - IBM TS7600 with ProtecTIER Software Upgrade Manual

10. Type q <enter> to quit.
11. The system returns you to the command prompt.
What to do next
The procedure is now complete. Continue to "Verifying the server time, date, and
timezone settings."

Verifying the server time, date, and timezone settings

Use this procedure to verify the server time, date, and timezone settings.
Procedure
Perform the following steps to verify the current time, date, and time zone settings:
1. Enter the command:
2. Confirm that the settings reflect the preferences that were provided by the
3. Repeat the above procedure for all additional servers that you upgraded to
20
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide
The following example shows the type of output that is displayed.
# Interface L/B Method
1 virt1 RR
2 virt2 RR
3 virt3 RR
4 virt4 RR
5 virt5 RR
6 virt6 RR
Available Options:
==================
(e)edit a virtual interface
(r)re-assign a physical interface
(c)commit changes
(q)quit
Please Choose (e,r,c,q): r
Available Devices:
eth5 eth9 eth7 eth6
Device to re-assign: (for example: eth5)
Available Virtual Devices:
virt3 virt6 virt5 virt4 virt1 virt2
Virtual to assign into: (for example: virt3)
9. When you want to commit the changes, type c <enter>.
date <enter>
The server time, date, and time zone settings, display. The following example
shows the type of output that is displayed.
Wed Apr 14 14:19:50 EDT 2010
customer. If changes are necessary, refer to Appendix A, "Changing the system
date and time," on page 37 for instructions, update the settings, and then
return to this page.
ProtecTIER v3.1.x.x.
IP Address Netmask
10.10.1.1 255.255.255.192 eth5
192.168.151.2 255.255.255.0 eth9
192.168.152.2 255.255.255.0 eth6
192.168.153.2 255.255.255.0
192.168.154.2 255.255.255.0
10.10.1.98 255.255.255.192 eth7
Devices