Local Area Connection Properties: Internet - IBM TS7600 with ProtecTIER Software Upgrade Manual

Figure 13. Local Area Connection Properties: Internet Protocol (TCP/IP)
8. Select Use the following IP address.
9. In the IP Address field, type 172.31.1.14 or 192.168.70.33 for a new IMM. In
the Subnet mask field, type: 255.255.255.0.
10. Click OK and then click Close to exit the Local Area Connections Properties
window.
11. In a cluster, reconnect the Ethernet cable to the IMM port on Server A.
12. On the TSSC or service laptop, open an Internet Explorer window.
13. In the Address Bar area of the browser window, type the default IMM card IP
address 172.31.1.254 or 192.168.70.125 for a new IMM and then press Enter.
14. In the Login window, enter the user ID USERID and the password PASSW0RD
(the 0 is a zero). Click OK.
Note: The username and password are case sensitive and must be entered in
all uppercase.
The Integrated Management Module Welcome window is displayed.
15. In the Integrated Management Module Welcome window:
a. Use the Inactive session timeout value menu to specify a reasonable
amount of time that keeps your session active until you can complete your
task. Do not select the No Timeout setting, which prevents anyone else
from logging into the IMM until you have logged out.
b. Click Continue. See Figure 14 on page 92.
Appendix I. Logging into the DD4 server through the IMM web interface
91