IBM TS7600 with ProtecTIER Software Upgrade Manual page 52

38
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide
The following is displayed:
Please specify the date in DD/MM/YYYY format [09/11/2009]: 09/11/2009
Please specify the time in HH:MM:SS format [11:56:16]:
7. Type the time in the specified format and press <Enter>. If you do not enter a
time, the default will be the time that appears within the brackets.
The following is displayed:
Date, Time, Timezone & Timeserver(s) configuration
==================================================
1. Set date & time
2. Set Timezone
3. Set Timeserver(s)
c. Commit changes and exit *
q. Exit without committing changes
Please Choose:
Note: If you have typed in new information, an asterisk (*) will appear at the
end of the c. Commit changes and exit menu option to show that there are
modifications to be saved.
At this point, you can choose either c to save the changes and exit the
setClock configuration, choose q to exit the configuration without saving the
changes, or continue synchronizing the local timezone (step 8) and/or adding
the timeservers to the system (step 11 on page 39).
8. Synchronize the local timezone by typing 2 <Enter> in the Please Choose:
field.
The following is displayed:
Please Choose:2
Enter a 2 letter country code (or type 'm' to enter the timezone manually):
9. Type, for example, US <Enter> for the United States. If you need a list of time
zone codes from countries other than the United States, see Appendix B,
"Worldwide time zone codes," on page 45.
The following is displayed: