IBM TS7600 with ProtecTIER Software Upgrade Manual page 50

Figure 3. Choose Link folder
10. Click Install.
11. Click Done.
12. If you configured replication, the user must create and configure the
13. If you did not configure replication, the customer can now resume use of their
36
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide
8. Select the location where the program links will be created:
v In your Home folder – Creates the links in the directory where the user's
files are typically stored. For example: /home/bill.
v Other – Creates the links in the default location (/opt/IBM/PTManager).
To specify a different location, click Choose and select a directory on the
workstation's hard drive.
v Don't create links – No links will be created.
9. Click Next.
The Pre-Installation Summary screen displays.
The Installing ProtecTIER Manager screen displays and ProtecTIER Manager
is installed.
When the installation finishes, the Install Complete screen displays.
The ProtecTIER Manager Installation wizard closes and the upgrade process is
complete.
replication grid before replication is fully functional. Turn the system over to
the customer, and refer them to the IBM System Storage ProtecTIER User's
Guide for Enterprise Edition and Appliance Edition, IBM form number GA32-0922
for detailed information.
ProtecTIER system.