Replacing The Operating Panel Cable - Fujitsu PRIMERGY Econel 200 S2 Service Supplement Manual

Replacement routines
4.2

Replacing the operating panel cable

Part number: A3C40060863
Ê Remove the side cover as described in section "Opening the server" on
page 17.
Ê Remove the front cover as described in section "Removing the front cover"
on page 19.
Figure 4: Removing the screws of the on/off button
Ê Loosen the two screws of the on/off button and pull it inward out of its holder.
Econel 200 S2
Replacing the operating panel cable
Service Supplement 21