Replacement Routines; Preparation; Opening The Server; Replacing The Operating Panel - Fujitsu PRIMERGY RX300 S3 Service Supplement Manual

4

Replacement routines

V
CAUTION!
Observe the safety instructions in the
4.1

Preparation

I
You will find a detailed description of 'Opening the server' and 'Removing
the front cover' in the Options Guide PRIMERGY RX300 S3.
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the on/off
switch.
Ê Pull all power connectors out of the power outlets.
4.1.1

Opening the server

Ê Loosen the two knurled screws and pull the server as far as possible out of
the rack.
Depending on how accessible the server is in the rack cabinet, it can make
sense to remove it from the cabinet. You will find a detailed description in the
Options Guide or the Operating Manual.
Ê Push the two locking buttons and remove the cover.
Ê Slide the cover to the rear side and remove it.
4.2

Replacing the operating panel

Ê Open the server as described in the
page 17.
RX300 S3
chapter "Safety notes" on page
section "Opening the server" on
Service Supplement
11.
17