Installling The Fan Box Holder; Replacing The Operating Panel - Fujitsu PRIMERGY RX300 S5 Service Supplement Manual

Replacement routines
4.1.3

Installling the fan box holder

Figure 3: Installing fan box holder
Ê Insert the fan box holder and fasten it with the captive scew.
Ê Lay the cables back into the cable channel of the fan box holder.
4.2

Replacing the operating panel

Ê Open the server as described in the
page 17.
Ê Remove the fan box (see Options Guide PRIMERGY RX300 S5 in chapter
„preparation".
Ê Remove the fan box holder on the right side behind the front panel frame.
Description see
RX300 S5
section "Removing fan box holder" on page
Service Supplement
Replacing the operating panel
section "Opening the server" on
17.
19