Table of Contents
Advertisement
Replacement routines
4.4
Replacing the temperature sensor
Part number: T26139-Y3850-V229
Ê Remove the side cover as described in section "Preparation" on page 17.
Figure 8: Removing the temperature sensor
Ê Release the temperature sensor from the cable clamp and remove the
connector from the operating panel cable (see circle).
Ê Connect the new temperature sensor to the operating panel cable, orient the
sensor towards the front of the server and secure it with the cable clamp.
Ê Close the server (for a detailed description see the Options Guide) and
connect the power plug.
Econel 200 S2
Replacing the temperature sensor
Service Supplement
25
Advertisement
Table of Contents
