Avaya 3600 Series Application Notes page 8

Enable OAI on the Phone. In the Admin menu, select Phone Config. In the Phone
10.
Config menu select OAI On/Off. Select Enable and press Softkey A (Save), press
Softkey D (Up).
Configure the Extension Number. In the Phone Setup menu select Ext. Enter the
11.
Extension that was administered on Avaya Communication Manager in Step 1 of Section
3 and press Softkey A (Save), press Softkey D (Up).
Configure the Password. If a Security Code is administered for the Wireless telephone
12.
(see Step 1 in Section 3), perform this step. In the Phone Setup menu select Password.
Enter the Security Code that was administered on Avaya Communication Manager In
Step 1 of Section 3 and press Softkey A (Save), press Softkey D (Up) until the Admin
menu is reached. Press the Softkey D (Exit) button. This will exit administration mode
and register the telephone to Avaya Communication Manager.
13. Turn on the Auxiliary Ring options. Press the FCN key and select Ring Options and
press the Softkey A (OK) button. Select Auxiliary Ring 1 and press the Softkey A
(OK) button. Select Vibrate Cadence followed by the Softkey A (OK) button. Select
any value except Off and press Softkey A (Save) then press Softkey D (Up). Press
Softkey D (Up) an additional three times to return to normal call handling mode.
DJB; Reviewed:
SPOC 2/15/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
8 of 28
3600-Indyme.doc