Singer SRP-50 Instruction Book page 8

4. Bring down both Push-up Cams "F" forward.
=
=
~----
':Jff}}f}ff}Jjfff}})JJJJ)JJ!j_
5. Hold Ribber with b th h d .
"G" on both s·d _ o an sand msert Ribber Joiners
I es Into slots of Auxiliary Pieces "H".
It will be easier to · t h .
left side. mser t e nght side first, then the
G
CHECK POINT
Ensure Ribber Needle Bed is at its highest position .
If not, push the Bed with both hands as f .
ar up as It goes.
6. Push Ribber on both ·d i~
no clearance
betwees~ ~i~~;a~ds Knit~?r"
until there
·l1ary Piece "J". r topper I and Auxi-
Fasten both screws with Screw Driver "K " .
- 4 -