P Carriage - Singer SRP-50 Instruction Book

0
c
P CARRIAGE
In drive lace knitting, use P Carriage "A" without P Presser
"B".
In pile knitting, use P Carriage "A" with P Presser "B"
attached.
Place P Presser "B" underneath Arm "C" and secure with
fastening screw "D".
WITHOUT P PRESSER
Place P Carriage straight onto Knitter or Ribber Needle Bed
ensuring rail guide "A" fits correctly on rail "B".
WITH P PRESSER ATTACHED
Place P Presser "A" first over Sinker Posts "B" thereafter
place rail guide "C" onto rail "D".
On Knitter always start from the right side.
®
Move P Carriage once (right-left).
Stitches will be behind latches and needles are aligned
in C position.
@
Move P Carriage twice (right-left-right).
Stitches have slipped off needles.
On Ribber always start from the left side.
®
Move P Carriage once (left-right).
Stitches will be behind latches and needles are aligned
in
·c
position.
@
Move P Carriage twice (left-right-left).
Stitches have slipped off needles.
- 11 -