Singer SRP-50 Instruction Book page 12

- 8
Drop Levers
On both left and right sides of Needle Bed you will find
Drop Levers (marked red) . Using these levers you can
change position of Needle Bed.
®
Top position (kn itting position)
This position is used for knitting rib stitches.
@
Middle position
Depress Drop Levers on both sides once, and Ribber
Bed is lowered to its middle position.
This position is used when picking up stitches.
@
Lowest position
Depress Drop Levers twice, and Ribber Bed is lowered
to its lowest position.
This position is used when knitting only on Knitter.
To restore Ribber Bed to its top position, lift up both ends
of the Bed with your hands.
Pile Levers
Above Drop Levers, Pile Levers (marked blue) are located,
and are used to broaden the distance between Knitter and
Ribber.
®
For normal knitting ensure both Pile Levers are in
upper position .
@
For pile knitting ensure both Pile Levers are in lower
position .
To restore the levers to upper position, lift them up with
your hands.