Singer SRP-50 Instruction Book page 20

•••
•
•••
•••••••••••••••••
••••••••••••••••••
•• • ••
0 -
2 Arrange needles for knitting the initial row.
1. Arrange needles of both beds for east-on.
(1) On both of Knitter and Ribber Beds, push 25 needles
on each side of centre(O) up to 0 position.
(2) Move Carriage 2-3 times carefully across needles in
0 position and leave it at right side.
(Needles in 0 position will be aligned in B position
on both beds.)
2. Thread yarn into Yarn Feeder.
(1) After threading yarn through Auto-Tension, make a
loop at the end of yarn and hold it at the left side
of both beds.
(2) Insert Hook Tool "A" from underneath, catch yarn
end, and pull it down.
(3) Hold yarn end and tie it around Clamp screw.
- 16 -