Viessmann Vitocal 300-G Series Installation And Service Instructions Manual page 55

Commissioning the system
External blocking of the compressor; mixer in control mode or CLOSED
Parameter
"System definition"
Ó
"Effect of ext. blocking on heat pump/heating circuits 7015"
"Effect of external blocking on pumps/compressor 701A"
External hook-up for heating/cooling circuits
Parameter
"Heating circuit 1"/"Heating circuit 2"/"Heating circuit 3"
"Remote control 2003"
or
"Remote control 3003"
or
"Remote control 4003"
Note
If heat pump stage 2 is connected, the external hook-
up for heating/cooling circuits is not possible.
Cooling function parameters
Parameter
"Cooling"
Ó
"Cooling function 7100"
"Cooling circuit 7101"
Room temperature sensor for separate cooling circuit
Parameter
"Cooling"
Ó
"Ranking room temp sensor separate cooling circuit 7106"
Parameters for solar DHW heating
Parameters in conjunction with solar control module type SM1
"Solar"
Ó
"Type solar control unit 7A00"
Parameter C0xx
Commissioning, inspection, maintenance
(cont.)
Setting
"0" to "8"
"0" to "31"
Setting
Ó
"2"
Setting
"0" No cooling
"1" Natural cooling with NC-Box with-
"2" Natural cooling with NC-Box with
"3" "Active cooling"
"1" Heating circuit A1/HC1
"2" Heating circuit M2/HC2
"3" Heating circuit M3/HC3
"4" Separate cooling circuit SKK
Setting
"0" Connection F16
"1" Heating circuit A1/HC1
"2" Heating circuit M2/HC2
"3" Heating circuit M3/HC3
"4" Do not adjust.
Setting
"3"
See installation and service instruc-
tions for "Solar control module, type
SM1".
out mixer (accessory)
mixer (accessory)
55