Viessmann Vitocal 300-G Series Installation And Service Instructions Manual page 106

Commissioning/service reports
Control parameter report
Parameter
Reduced ventilation
Standard ventilation
Intensive ventilation
Background ventilation, second fan duct
Reduced ventilation, second fan duct
Standard ventilation, second fan duct
Intensive ventilation, second fan duct
Bypass mode
Central heating and heat recovery
Imbalance permitted
Specified imbalance
Set reheater coil temperature
Humidity sensor sensitivity
Min. temperature, geothermal heat ex-
changer
Max. temperature, geothermal heat ex-
changer
Function, input 1
Min. voltage, input 1
Min. voltage, input 2
Flow rate correction
Note
The factory settings of parameters C101 to C1C7
depend on the ventilation unit and may differ from the
values specified here. The factory setting is displayed
in the service menu for each parameter with "Del
con ...":" " See "Vitotronic 200 service instructions".
106
(cont.)
Code Delivered condition Commission-
C10A
■
■
■
C10B
■
■
■
C10C
■
■
■
C189 15 %
C18A 25 %
C18B 50 %
C18C 75 %
C1A0 0
C1A1 0
C1A2 1
C1A3 0
C1A4 210 (
C1A6 0
C1AA 50 (
C1AB 250 (
C1B0 0
C1B1 0 (10
C1C1 0 (10
C1C7 100
ing
Vitovent 200-W:
25 %
Vitovent 300-C:
75 m 3 /h
Vitovent 300-W:
3
100 m /h
Vitovent 200-W:
50 %
Vitovent 300-C:
100 m 3 /h
Vitovent 300-W:
3
150 m /h
Vitovent 200-W:
75 %
Vitovent 300-C:
3
125 m /h
Vitovent 300-W:
225 m 3 /h
≙
21 °C)
≙
5 °C)
≙
25 °C)
≙
1 V)
≙
1 V)
Maintenance/
service