Siemens SIMATIC ET 200SP Manual page 74

DI operating mode
Header information
The figure below shows the structure of the header information.
Figure A-2
Module header information
The figure below shows the structure of the module header information.
Figure A-3
Module parameter block
The figure below shows the structure of the module parameter block for channels 0 to 7. You
enable a parameter by setting the corresponding bit to "1".
Figure A-4
Digital input module DI 8x24VDC HS (6ES7131-6BF00-0DA0)
Equipment Manual, 11/2019, A5E35243810-AD
A.1 Parameter assignment and structure of parameter data record for
Structure of the header information
Module header information
Module parameter block
Parameter data records
73