Address Space; Assignment Of The Control Interface - Siemens SIMATIC ET 200SP Manual

Counting operating mode (CNT)
4.2 Parameters/address space
4.2.4

Address space

4.2.4.1

Assignment of the control interface

Control interface
The user program uses the control interface to influence the behavior of the module's
counter. The figure below shows the address space allocation for the control interface in the
process image of the outputs.
The following table shows the offset of the control interface for the channels of the module:
Channel
0
1
2
3
Enter the offset from the table for x in the following screen.
Figure 4-3
42
Assignment of the control interface
Offset x
0
5
10
15
Digital input module DI 8x24VDC HS (6ES7131-6BF00-0DA0)
Equipment Manual, 11/2019, A5E35243810-AD