Siemens SIMATIC ET 200SP Manual page 42

Comparison value 0
Sets the first comparison value.
The following applies:
● Comparison value 0 < comparison value 1
● Comparison value 0 ≥ counter low limit
Potential group
Specifies whether a light-colored BaseUnit with incoming supply voltage is located on this
slot (see ET 200SP Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/58649293) system manual).
Digital input module DI 8x24VDC HS (6ES7131-6BF00-0DA0)
Equipment Manual, 11/2019, A5E35243810-AD
Counting operating mode (CNT)
4.2 Parameters/address space
41