Others; Troubleshooting - Sony JunboTron JME-SA200 Operating Instructions Manual

Screen alignment controller
Table of Contents

Advertisement

Troubleshooting

Problem
The title display does not
appear after the power has
been turned on and 9
seconds or more have
elapsed.
The MAIN MENU does not
appear in the display
window.
The menu or the data on
the display does not
change even if the button
is pressed. (for wireless
control)
56

Others

If you think you have a problem during operation, check through the
following list.
Cause
The battery pack is not attached
to the unit.
The battery is exhaused
completely.
The unit is not connected to the
ICU controller properly. (for wired
control)
The digital data card is not
inserted correctly. (for wireless
control)
The cellular phone is not
connected to the unit properly.
(for wireless control)
The phone number for the modem
has not been registered.
The cellular phone is not
connected to the unit properly.
The communication has
interrupted.
The battery for the cellular phone
is exhaused.
Corrective action
Attach the battery pack.
Charge the battery.
Check the connections.
Insert the card fully into the slot.
Check the cellular phone connections.
Remove the cause of the problem, turn the power on and
establish communcation again. Perform the adjustment from
the stage in which you have pressed the ENTER button.

Advertisement

Table of Contents
loading

Table of Contents