Locking the Interface
Lock transmitter interface controls to prevent accidental or unauthorized changes to parameters. The lock icon appears on the
home screen when a lock is enabled.
1.
From the Utilities menu, navigate to Locks and select one of the following lock options:
◦
None: The controls are unlocked
◦
Power: The power switch is locked
◦
Menu: The menu parameters are locked
◦
All: The power switch and menu parameters are locked
2.
Press enter to save.
Tip: To quickly unlock a transmitter: Press enter twice, select None, and press enter.
Batteries
Battery Installation
① Accessing the battery
compartment
② Installing batteries
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the installed AA battery
type.
Unscrew the cover on the transmitter as shown to access the battery compartment.
•
AA batteries: Place batteries (note polarity markings) and AA Adapter as shown. Close
the door to secure the batteries.
•
Shure rechargeable battery: Place battery as shown (note polarity markings). Remove
the AA adapter and stow it in the door. Close the door to secure the battery.
If using AA batteries, set the battery type using the transmitter menu.
Shure Incorporated
8/26