Shure AD1 Manual page 12

Marker
When enabled, press the enter button to drop a marker in Wireless Workbench.
Battery
Displays battery information:
• Battery Life: Runtime reported in bar display and time (hours:minutes)
• Charge: Percentage of charge capacity
• Health: Percentage of current battery health
• Cycle Count: Total of the number of charging cycles for the installed battery
• Temperature: Battery temperature reported in Celsius and Fahrenheit
About
Displays the following transmitter information:
• Model: Displays the model number
• Band: Displays the tuning band of the transmitter
• FW Version: Installed firmware
• HW Version: Hardware version
• Serial Num: Serial number
Reset All
Restores all transmitter parameters to factory settings.
IR Sync
Use IR Sync to form an audio channel between the transmitter and receiver.
Note: The receiver band must match the band of the transmitter.
1. Select a receiver channel.
2. Tune the channel to an available frequency using group scan or manually turn to an open frequency.
3. Power on the transmitter.
4. Press the SYNC button on the receiver.
5. Align the IR windows between the transmitter and the receiver so that the IR LED illuminates red. When com­
plete, Sync Success! appears. The transmitter and receiver are now tuned to the same frequency.
Note:
Shure Incorporated
12/24