Power Switch; Power Led - Shure AD1 Manual

Y-Cable for bodypack transmitters
LEMO Y-cable for bodypack transmitters
Instrument cable
Replacement belt clip
Instrument cable with right angle 1/4" connector
Mute Switch for Bodypack
Mute Switch for 2 Bodypacks
AD1 Transmitter Overview
① RF Antenna
For RF signal transmission.
② Display
View menu screens and settings. Press any control button to activate the backlight.
③ Infrared (IR) Port
Align with the receiver IR port during an IR Sync for automated transmitter tuning and setup.
④ Control Buttons
Use to navigate through parameter menus and to change settings.
⑤ Battery Compartment
Requires two AA batteries or Shure SB900A rechargeable battery.
⑥ AA Battery Adapter
Use to secure AA batteries. Remove when using a Shure SB900A battery.
⑦ SMA Connector
Connection point for RF antenna.

⑧ Power Switch

Powers the unit on or off.

⑨ Power LED

• Green = unit is powered on
• Red = low battery, Mute Mode enabled, input overload, or battery error (see Troubleshooting)
AXT652
AXT652LEMO3
WA302
44A12547
WA304
WA661
WA662
Shure Incorporated
3/24