Audio Menu; Utilities Menu - Shure AD1 Manual

Sets the RF output to On or Mute.
• On: RF signal is active
• Mute: RF signal is inactive

Audio Menu

Pad
Adjust the pad to avoid overloading the audio input. Select -12 dB or Off.
Offset
Adjust Offset level to balance mic levels when using two transmitters or when assigning multiple transmitters to re­
ceiver slots. Adjustment range: -12 dB to +21 dB.
Polarity
Selectable polarity assignment for the audio input connector:
• Pos: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of
XLR output) and the tip of the TRS output.
• Neg: Positive pressure on microphone diaphragm produces negative voltage on pin 2 (with respect to pin 3 of
XLR output) and the tip of the TRS output.
Mute
When enabled, the power switch is configured as a mute switch for the audio:
• Power switch on: Audio signal on
• Power switch off: Audio signal muted
Exit mute mode to return the power switch to its normal functionality.
Tone Gen
Transmitter will generate a continuous test tone:
• Freq: The tone can be set to 400 Hz or 1000 Hz.
• Level: Adjusts the output level of the test tone.

Utilities Menu

Device ID
Assign a device ID of up to 9 letters or numbers.
Locks
Locks the transmitter controls and power switch.
• None: The controls are unlocked
• Power: The power switch is locked
• Menu: The menu parameters are locked
• All: The power switch and menu parameters are locked
Shure Incorporated
11/24