Table of Contents
Advertisement
1. From the Radio menu, navigate to Output.
2. Choose one of the following options:
◦ On: RF signal is active
◦ Mute: RF signal is disabled
3. Press enter to save.
Turning the transmitter off and on, or replacing the battery will restore Output to On.
Power-on RF Mute
Power-on RF Mute places the transmitter in RF Mute mode immediately when turned on.
• Starting with the transmitter off, press and hold the exit button, and then switch on the power
• Continue to hold the exit button until the RF Muted message appears on the home screen
Input Overload
The OVERLOAD message appears when the audio input experiences a high-level signal. The power LED turns
red as an additional indicator of an overload. Reduce the input signal or enable the input pad to remove the over
load condition.
Tip: To enable the input pad, navigate to
>
and select -12 dB.
Audio
Pad
Shure Incorporated
15/24
Advertisement
Table of Contents
