Audio Menu
Offset
Adjust Offset level to balance mic levels when using two transmitters or when assigning multiple transmitters to receiver
slots. Adjustment range: -12 dB to +21 dB.
Mute
When enabled, the power switch is configured as a mute switch for the audio:
◦
Power switch on: Audio signal on
◦
Power switch off: Audio signal muted
Exit mute mode to return the power switch to its normal functionality.
Tone Gen
Transmitter will generate a continuous test tone:
◦
Freq: The tone can be set to 400 Hz or 1000 Hz.
◦
Level: Adjusts the output level of the test tone.
Utilities Menu
Device ID
Assign a device ID of up to 9 letters or numbers.
Locks
Locks the transmitter controls and power switch.
◦
None: The controls are unlocked
◦
Power: The power switch is locked
◦
Menu: The menu parameters are locked
◦
All: The power switch and menu parameters are locked
Marker
When enabled, press the enter button to drop a marker in Wireless Workbench.
Battery
Displays battery information:
◦
Battery Life: Runtime reported in bar display and time (hours:minutes)
◦
Charge: Percentage of charge capacity
◦
Health: Percentage of current battery health
◦
Cycle Count: Total of the number of charging cycles for the installed battery
◦
Temperature: Battery temperature reported in Celsius and Fahrenheit
About
Displays the following transmitter information:
◦
Model: Displays the model number
◦
Band: Displays the tuning band of the transmitter
◦
FW Version: Installed firmware
Shure Incorporated
13/26