Registration Sensor - Ricoh Russian-C2a Service Manual

JAM HISTORY
1.4 JAM HISTORY
The jam history is read as shown below.
1.4.1 JAM CONDITION TABLE
Copier
Code
01 Jams at power on.
03 Paper does not reach the upper relay sensor (from paper tray unit)
04 Paper does not reach the lower relay sensor.
05 Paper does not reach the vertical transport sensor (optional paper tray unit).
06 Paper does not reach the LCT relay sensor.
11 Paper does not reach the registration sensor.
12 Paper does not reach the paper exit sensor
13 Paper does not reach the bridge relay sensor
14 Paper does not reach the bridge exit sensor
15 Paper does not reach the duplex entrance sensor.
16 Paper does not reach the duplex exit sensor
17 Paper does not reach the 1-bin tray exit sensor.
20 Paper does not reach the finisher entrance sensor
21 Paper does not reach the finisher shift tray exit sensor.
23 Paper does not reach the finisher staple tray paper sensor.
24 The finisher stack feed out belt H.P sensor does not turn on.
26 Finisher paper taking out error
27 Finisher drive error
28 Finisher tray lift error
29 Finisher jogger drive error
30 Finisher tray shift drive error
31 Finisher staple error
32 Finisher stack feed-out error
33 Finisher feed out error
34 Finisher no response
61 Paper caught at the registration sensor.
62 Paper caught at the paper exit sensor.
63 Paper caught at the bridge relay sensor.
64 Paper caught at the bridge exit sensor.
65 Paper caught at the duplex entrance sensor.
66 Paper caught at the duplex exit sensor.
67 Paper caught at the 1-bin tray exit sensor.
The last 5 digits of the total counter
value when the jam occurred
Paper Size
Jam Condition
Meaning
APPENDIX-6
9 November, 2001
B027I903.WMF