Sp5-Xxx: Mode - Ricoh Russian-C2a Service Manual

10 August, 2001
4
Mode Number/Name
911* HDD Formatting
1 All
2 Image Files
3 NetFiles
4 Job Log
5 Printer Fonts
9 Debug
920 Scanning (Factory)
930* Sensor Condition
1 Platen Cover sensor
2 Scanner HP Sensor

SP5-XXX: Mode

5
Mode Number/Name
024* mm/inch Selection
104* A3/DLT Double Count
106* ADS Level Selection
113* Option Counter Type
118* Disable Copying
120* Opt. Counter Reset Setting
Function/[Setting]
Select the desired SP, then press Execute on the
touch panel to format each HDD partition.
Note: After execution, turn the main power switch off
and on.
Initializes the entire hard disk.
Initializes documents stored in document server mode,
stamp print data, scanner send data, fax send data.
Initializes network file application thumbnail images.
Initializes job logging data (for Poplar server) DFU
Initializes printer fonts and stored fonts.
DFU
DFU
Checks the following sensors in the scanner unit.
[0 = Opened, 1 = Closed]
[0 = Opened, 1 = Closed]
Function/[Setting]
Selects whether mm or inches are used in the display.
Note: After selecting the number, you must turn the
main power switch off and on.
Eur./Asia model
[0 = mm / 1 = inch]
American model
[0 = mm / 1 = inch]
Specifies whether the counter is doubled for A3/11" x
17" paper.
If "Yes" is selected, the total counter (mechanical
counter) and the current user code counter counts up
twice when A3/11" x 17" paper is used.
[0 = No / 1 = Yes]
Selects the image density level that is used in ADS
mode.
[1 ~ 7 / 4 / 1 notch/step]
Selects the optional counter type.
Japan only DFU
[0 = No, 1 = Key Card1, 2 = Key Card2, 3 = Pre-paid
Card, 4 = Coin lock, 5 = MF key card]
DFU
This SP is for Japan only. Do not change the value.
[0 = Yes / 1 = Stand-by / 2 = None]
4-31
SERVICE PROGRAM MODE